Start of Section 10 – The Tailcone

The elevators are done with the exception of the trim tabs… Well the first iteration of the trim tabs anyways. The main mistake I made on the trim tabs was bending the close-out tabs on the end too close to the reliefs in the skins. I misread the directions and thought I was supposed to put the supporting wooden blocks 1/32″ to the inside, when really it was in the opposite direction. The end result is some bulging as you approach the ends of the tabs because the tabs are too long. Not real terrible, but I’m just not happy with how they came out. So parts are on order to build new ones, which won’t take more than a few hours to complete.

Testing the trailing edge bend of the trim tabs
Bending the close-out tabs (wood blocks placed too far inboard)
Trim tab hinge in place and match drilled
Proseal curing…

So for now, I’m on to Section 10- The Tailcone.

Rear tie-down anchor point

Tailcone floor plus lots of parts prepped in the background

Advertisements

One thought on “Start of Section 10 – The Tailcone

  1. Bill Harr October 6, 2016 / 4:56 pm

    Nice job on sticking to your personal standards – your plane is going to come out exactly the way you want. Looking forward to the next update!

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s