Section 12 – Fiberglass Fairings

Today I started on the fiberglass fairings for the ends of all surfaces. For the most part, these all come pre-formed. Some trimming and drilling are all that is needed to fit them to the airplane. There are a couple of fairings that will need to have an end closed up with a fiberglass layup. So I’ve ordered some supplies to do that. I ordered some West Systems 105 resin epoxy with hardener, along with some flox, microballons, and some fiberglass cloth to get me started. I also ordered the fiberglass practice kit from Aircraft Spruce with a book to play around a bit honing my skills. I’ve never really worked on fiberglass before, so this will be all new to me.

Fairings!
Fitting the fairing to the left Elevator
Riveted on!
Front angle

 More of this to come!

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s